K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Starter Motor: Service and Repair
STARTER MOTOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Raise the vehicle and support with suitable safety stands.
3. Disconnect the battery positive cable and the wiring harness from the starter.
4. Remove the starter mounting bolts and washers (with the shims, if equipped).
5. Remove the starter.
6. Note the position of the snap-on shield and then remove the shield as necessary.