K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Control Arm: Technical Service Bulletins
Suspension - Revised Torque Specifications
File In Section: 03 - Suspension
Bulletin No.: 01-03-08-001
Date: January, 2001
SERVICE MANUAL UPDATE
Subject:
Revised Fastener Tightening Specifications
Models:
2000 Chevrolet and GMC C/K Pickup and Utility Models (Classic)
2000 Cadillac Escalade
This bulletin is being issued to revise the Lower Control to Frame Nuts and Bolts (C and K Models) specification in the Front Suspension Fastener
Tightening Specifications table of the 2000 C/K Truck Service Manual (GMT/00-CK-1).
The correct specification for the Lower Control to Frame Nuts and Bolts (C and K Models) is 137 Nm (101 lb ft).
This information has been updated in SI2000. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the
affected page.
DISCLAIMER
