K Yukon/Denali 4WD V8-5.7L VIN R (2000)
1. Install the front glass run channel from the door.
2. Install the front glass run channel top bolt finger tight.
Do not tighten the bolt.
3. Install the window glass weatherstrip.
4. Install the window.
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the window front channel top bolt.
Tighten the window front channel top bolt to 2 N.m (18 lb in).
Door Window Weatherstrip
Front Side Door Window Weatherstrip Replacement
Removal Procedure
1. Remove the window.
2. Pull the weatherstrip from the following locations:
*
The front of the glass run channel
*
The top of the window frame flange
*
The rear of the glass run channel
Installation Procedure