K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
12.
Tighten the nut until the shoulder bottoms out.
Tighten
Tighten the nut to 12-14 N.m (106-124 lb in).
13.
Install the door detent spring. Use the J 36604, or equivalent. Refer to the Doors subsection in the appropriate Service Manual for the door spring
installation procedures.
14.
Open and close the door several times in order to test for noise, high effort and free movement of the detent link.
Parts Information
P/N
Description
Qty
15043450
Link Kit, Frt Side Dr
1
Hinge Detent
1050109
Grease
1
(In Canada use
P/N 5264008)
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor
Operation
Description
Labor Time
B4057
Link or Spring, Frt Dr Hold
Use published
Open (Both) - Replace
labor
operation time