K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
11.
Lift the stud in order to engage the knurls into the hinge strap. Tap the stud with a hammer until the knurls are halfway installed.
12.
Tighten the nut until the shoulder bottoms out.
Tighten
Tighten the nut to 12-14 N.m (106-124 lb in).
13.
Install the door detent spring. Use the J 36604, or equivalent. Refer to the Doors subsection in the appropriate Service Manual for the door spring
installation procedures.
14.
Open and close the door several times in order to test for noise, high effort and free movement of the detent link.
Parts Information
P/N
Description
Qty
15043450
Link Kit, Frt Side Dr
1
Hinge Detent
1050109
Grease
1
(In Canada use
P/N 5264008)
Parts are currently available from GMSPO.
Warranty Information