K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Power Seat Switch: Service and Repair
Lumbar Switch Replacement (Manual)
Manual
REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Pull the switch out from the opening in the side of the seat cushion.
3. Remove the switch wiring harness in-line connector.
4. Remove the switch and the wiring harnesses from the side of the seat cushion.
INSTALLATION PROCEDURE
1. Route the switch wiring harness through the opening in the side of the seat cushion.
2. Install the switch wiring harness to the vehicle wiring harness.
3. Position the switch in the seat cushion opening and install the screws.
4. Install the seat assembly in the vehicle.
Manual Split Bench
REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the screws that attach the switch to the side of the seat cushion.
Pull the switch out from the opening in the side of the seat cushion.
3. Remove the switch wiring harness in-line connector.
4. Remove the following components from the side of the seat cushion:
^
The switch
^
The wiring harness
INSTALLATION PROCEDURE
1. Route the switch wiring harness through the opening in the side of the seat cushion.
2. Install the switch wiring harness to the vehicle wiring harness.
3. Position the switch in the seat cushion opening.
4. Install the screws.
5. Install the seat assembly into the vehicle.