K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster Hose Replacement
REMOVAL PROCEDURE
1. Disconnect hose from the fitting on the brake booster.
2. Disconnect hose from the fitting on the engine.
3. Remove the hose.
INSTALLATION PROCEDURE
1. Route the hose in the same position as it was prior to removal.
2. Install the hose to the fitting on the engine.
3. Install the hose to the fitting on the brake booster.
