K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
![background image](/gmc/k_yukon/denali_4wd/v8-6.5l_dsl_turbo_vin_s/Page-895002.png)
1. Install the new flange seals, the new nuts, and the new studs connecting the Y-pipe, catalytic converter assembly to the exhaust manifold.
^
Tighten the studs to 22 Nm (16 ft. lbs.).
^
Tighten the nuts to 64 Nm (47 ft. lbs.).
2. Position the Y-pipe and the catalytic converter assembly to the flat flange.
3. Install the nuts to the flat flange studs.
^
Tighten the nuts to 64 Nm (47 ft. lbs.).