K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement
REMOVAL PROCEDURE
TOOLS REQUIRED
J 38042 Dual O-Ring Separator
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging See: Refrigerant/Service and Repair
3. Remove the grille.
4. Remove the bolt.
5. Disconnect the hose assembly from the top of the compressor.
6. Remove the sealing washers.
7. Disconnect the hose assembly from the accumulator using the J 38042.
8. Remove the O-Ring seals from the accumulator hose.