K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
4. Install the spotlamp and shaft through the A pillar into the mounting bracket.
5. Rotate the spotlamp to the upright position. Point the spotlamp forward.
6. Install the bracket set screw.
7. Tighten the set screw just enough in order to firmly hold the spotlamp in the upright position.
8. Install the wire clip.
9. Install the collar.
10. Connect the electrical connector.
11. Install the handle onto the outer tube shaft.
12. Install the spotlamp wedge key screw.
13. Connect the negative battery cable(s).
