K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
3. Install the EGR valve vacuum hose.
4. Install the upper intake manifold cover.
5. Install the upper intake manifold cover bolts.
Tighten
Tighten the bolts to 11 N.m (100 lb in).
6. Install negative battery cables.
7. Start and idle engine.
IMPORTANT: If the ALM cells are not reset, a poor driveability, heavy black smoke and EGR DTCs will exist until vehicle has been driven. The
ALM cells will adjust to normal settings after the vehicle has been driven (mileage will vary) and all DTCs are cleared.
8. Reset ALM cells using scan tool (under special functions in scan tool).