K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
6. Remove the wiring harnesses and fuel hoses.
7. Remove the fuel manager/filter by lifting straight up.
INSTALLATION PROCEDURE
1. Install the fuel hoses and wiring harnesses.
2. Position the fuel manager/filter to the intake manifold.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the fuel manager/filter mounting bolts.
Tighten
Tighten the mounting bolts to 25 N.m (18 lb ft).
4. Bleed the air from the fuel manager/filter. Refer to Fuel Feed and Fuel Return Pipe Purge Procedure.