K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Description
6. Loosen the intake duct clamp and remove the intake duct from the MAF sensor.
7. Remove the air filter adapter screws.
8. Remove the air filter adapter from the MAF sensor.
INSTALLATION PROCEDURE
Description
1. Install the air filter adapter to the MAF sensor.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the 2 air filter adapter screws.
Tighten
Tighten the screws to 2.8 N.m (25 lb in).
3. Install the intake duct to the MAF sensor.
4. Tighten the intake duct clamp.
5. Install the air filter onto the air filter adapter.
6. Install the air filter, MAF sensor, and intake duct assembly into the air cleaner box.