K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
3. Remove the bolt retaining the retractor to the floor panel.
4. Remove the retractor from the vehicle.
5. Remove the cover from the buckle assembly which conceals the nut.
6. Remove the nut from the buckle assembly to floor weld stud.
7. Remove the seat belt warning wire from the buckle assembly on the driver's side only.
8. Remove the buckle assembly from the vehicle.
Suburban and Crew Cab
Caution: Refer to Belt Replacement Caution in Cautions and Notices.