K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
19. Tighten Hand tighten the bolts in J 36652 until the bolts are snug.
20. Align the following during this procedure:
^
The tripot boot (3)
^
The housing (1)
^
The swage ring (2) Tighten each bolt 180 degrees at a time. Alternate between the bolts until both sides of the top half of J 36652 touch the
bottom half of the J 36652.
21. Loosen the bolts and remove the halfshaft assembly from J 36652.
22. Remove the convolute retainer from the boot.