K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Seals and Gaskets: Service and Repair
Removal Procedure
^
Tools Required
-
J 38805 Main Shaft Nut Socket
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case.
3. Perform the following:
3.1.
Remove the bolts securing the extension housing to the transmission.
3.2.
Remove the extension housing from the transmission.
4. Remove the mainshaft nut and washer from the mainshaft using J 38805.
5. Remove the vibration damper from the mainshaft using a suitable gear puller.