K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
1. Install three bolts securing the motor/encoder and the rubber gasket to the transfer case.
^
Tighten the motor/encoder bolts to 25 Nm (18 ft. lbs.).
^
Ensure the motor/encoder aligns properly with the transfer case shift shaft.
^
Align the motor/encoder mating surface detent with the transfer case mating surface detent.
2. Install the transfer case wiring harness connectors to the motor/encoder.
3. Install the transfer case shield.