K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Wiper Blade: Service and Repair
Wiper Arm Blade Replacement - Rear
REMOVAL PROCEDURE
1. Insert a narrow-bladed screwdriver into the release slot over the wiper blade retainer spring.
2. Pivot the screwdriver so that the blade tip presses downward on the retainer spring and releases the wiper blade from the pin of the wiper arm.
3. Remove the wiper blade from the wiper arm.
INSTALLATION PROCEDURE
1. install the wiper blade on the wiper arm pin.
2. Snap the wiper blade into place.