R 3500 P/U 2WD V8-350 5.7L (1989)
Installing The Pulley Rotor Bearing
1. Pulley (26) on J 21352-A.
NOTICE: Do not support the rotor by resting the pulley rim on a flat surface during bearing installation or the rotor face will be bent.
2. Pulley bearing (25) into the hub using J 29886, J 9481-A and J. th21352-A.
^
J 33019 into the pulley bore.
Staking The Pulley Bearing In The Pulley Bore
^
Seat the pulley and bearing assembly on J 21352-A to support to the hub under the staking pin location.
^
Strike the staking pin with a hammer until a metal stake, similar to the original, is formed down to, but not touching the bearing.
-
Position the stake pin after striking.
-
The staked metal should not contact the outer race of the bearing to prevent the possibility of bending the outer race.
Bearing Stake Locations
-
Stake 3 places 120 degrees apart.
3. Pulley (26) on the front head.