R 3500 P/U 2WD V8-350 5.7L (1989)
![background image](/gmc/r_3500_p/u_2wd/v8-350_5.7l/Page-1645004.png)
Installing The Seal Cage
3. Seal assembly into place in the compressor seal cavity.
^
Twist J 37794 to disengage it from the cage.
4. Clean refrigerant oil to the shaft seal seat.
5. Shaft seal seat (23) with J 37793.
6. Snap ring with the flat side toward the compressor.
7. Clutch spacer shims (3).
8. Use the originals if possible to give the same gap.
9. New felt ring.
^
If the clutch was not disassembled, reinstall the clutch front plate.