R 3500 P/U 2WD V8-379 6.2L DSL (1988)
Compressor Clutch: Service and Repair
With DA-V5 Compressor
Clutch Plate and Hub Assembly
Clean
^
The compressor assembly with solvent and blow dry with dry air.
Remove or Disconnect
Tools Required:
J 33013-B Hub and Drive Plate Remover and Installer
J 33022 6-Point 13 mm Socket
J 33027 Clutch Hub Holding Tool
J 34992 Compressor Holding Fixture
^
Clamp J 34992 in a vise and attach the compressor to the holding fixture with thumb screws.
Removing The Shaft Nut
1. Shaft nut (21) using J 33022.
^
Hold the clutch plate and hub assembly (22) steady using J 33027.
2. Clutch plate and hub assembly (22).
^
Thread J 33013-B into the clutch plate and hub assembly (22).