R 3500 P/U 2WD V8-454 7.4L VIN W 4-bbl (1988)
![background image](/gmc/r_3500_p/u_2wd/v8-454_7.4l_vin_w_4-bbl/Page-1591003.png)
Fig. 1 Exploded view of power steering gear
Fig. 2 Rack piston plug removal
Fig. 3 Bearing removal
Refer to Fig. 1, when performing the following procedures.
1.
Pry retaining ring out of housing groove with a screwdriver.
2.
Turn stub shaft to the left until plug on opposite end is forced out of cylinder, then remove seal.
3.
Remove plug from rack piston, Fig. 2.