S15/T15 2WD Jimmy V6-262 4.3L (1991)
Installing The Rotor And Bearing (V-Groove Type)
2. Rotor (6) and bearing (5) assembly to the compressor with J 29886 and J 26271-A.
-
With Rotor and Bearing Installer J 26271-A assembled to Universal Handle J 29886, force will be applied to the inner race of the bearing and
the face of the rotor when installing the assembly onto the front head of the compressor.
3. Retainer ring (4) with J 6083.
-
Apply Loctite 601 or equivalent to the threads of the pulley rim mounting screws.
4. Pulley rim mounting screws (10) and new special lock washers (9).
-
Hand spin the pulley to check for free rotation.
Tighten
-
Screws (10) to 11 Nm (100 in. lbs.).
-
Bend the washers to lock the rim in place.
5. Clutch rotor (5) and hub (3) assembly.
V-Groove Drive
