gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

M/T - Fifth Gear Whine, Revised Shift Lever & Boot|Page 8852 > < Speedometer - Registers When Vehicle is Stationary
Page 1
background image

Shifter M/T: All Technical Service Bulletins
M/T - Fifth Gear Whine, Revised Shift Lever & Boot

Group Ref.: Transmission

Bulletin No.: 367201

Date: April, 1994

SUBJECT:
5TH GEAR WHINE (INSTALL REVISED SHIFT LEVER AND BOOT)

MODELS: 
1989-93 CHEVROLET AND GMC S TRUCKS WITH 2.8L OR 2.5L ENGINE (RPOs LL2, L38, LN8) AND MANUAL TRANSMISSION

THIS BULLETIN IS BEING REVISED TO INCLUDE SERVICE PARTS INFORMATION AND TO UPDATE THE PROCEDURE. 
PREVIOUS DIVISIONAL PUBLICATION NUMBERS WERE:

DIVISION

BULLETIN NUMBER

CHEVROLET

93-172-7B

GMC TRUCK

93-7B-64

GM CANADA

93-7B-108

CONDITION:

Some owners may comment about a whine or a gear noise when the transmission is in the 5th gear position. The noise usually occurs at highway speeds.

CAUSE:

The audible noise is a result of the internal gearbox working noises being transferred and amplified through the shift lever.

CORRECTION:

To isolate the audible noise from being transferred into the interior of the truck, a revised shift lever and boot have been released.

SERVICE INFORMATION:

(Refer to Figure 1)

1. Remove the shift knob (5) and lock nut (6).

2. Remove screws (9) and retainer (10), if used.

3. Remove shift boot (8).

4. Remove the shift lever (7) and the lock nut (11). Hold the lock nut and unscrew the shift lever using the wrench slots (A).

M/T - Fifth Gear Whine, Revised Shift Lever & Boot|Page 8852 > < Speedometer - Registers When Vehicle is Stationary