S15/T15 4WD Jimmy L4-121 2.0L VIN Y 2-bbl (1983)
Clutch: All Technical Service Bulletins
Oil Pressure Plugs - Revised
Number:
83-I-79
Section:
VIIc
Date:
May, 1983
FIGURE 1 - Oil Pressure Plug
Subject:
NEW OIL PRESSURE PLUGS 1983 THM 700-R4
TO:
ALL CHEVROLET DEALERS
Beginning October 12, 1982, all THM 700-R4 transmissions were built with a new oil pressure plug in three (3) locations (see Figure 1).
The past oil pressure plug will still be used at the line pressure tap location. The new oil pressure plug will be used at the 2nd clutch, 3rd clutch and 4th
clutch pressure tap locations (See figure 1).
To install these oil pressure plugs, apply thread sealant on the plug and torque as follows:
^
Torque past oil pressure plug to 11 N-m (8 ft.lbs.).
^
Torque new oil pressure plug to 24 N-m (18 ft.lbs.).