S15/T15 4WD Jimmy V6-262 4.3L VIN Z (1992)
Blower Motor: Service and Repair
Evaporator and Blower Assembly Replacement
Evaporator And Blower Case Replacement
REMOVE OR DISCONNECT
1. Discharge and recover refrigerant from the system.
2. Electrical connectors, as necessary.
3. Compressor hose assembly (3) from accumulator (6).
4. Evaporator tube (5) from evaporator (10).
-
Cap or plug open lines.
5. Screws (29) and nuts (37).
6. Blower case (30).
7. Gasket (24).
INSTALL OR CONNECT
1. Gasket (24).
2. Blower case (30).
NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."
3. Screws (29) and nuts (37).
4. Evaporator tube (5) to evaporator (10).
5. Compressor hose assembly (3) to accumulator (6).
Tighten
-
Evaporator tube connection to 41 Nm (30 ft. lb.).