S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
Brake Caliper: Service and Repair
Rebuild
Fig. 1 Exploded View
DISASSEMBLY
1.
Remove caliper.
2.
Disconnect hose from steel line, remove U-shaped retainer and withdraw hose from frame support bracket.
3.
After cleaning outside of caliper, remove brake hose and discard copper gasket.
4.
Drain brake fluid from caliper.
Fig. 4 Removing Piston From Caliper
5.
Pad caliper interior with clean shop towels and use compressed air to remove piston, Fig. 5. Use just enough air pressure to ease piston out of
bore. Do not blow piston out of bore.
WARNING: Do not place fingers in front of piston in an attempt to catch or protect it when applying compressed air. This could result
in serious injury.
