S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
Brake Master Cylinder: Service and Repair
Master Cylinder Removal
Master Cylinder
CAUTION: Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, drip pans and fender covers to prevent brake fluid
from contacting these areas.
1. On vehicles with manual brakes, disconnect the master cylinder pushrod from the brake pedal.
2. On all models, disconnect all wire connectors from master cylinder components.
3. Disconnect the brake lines from master cylinder. Cover the ends of the lines to prevent dirt from entering system.
4. Remove the master cylinder mounting nuts.
5. Remove the combination valve bracket.
6. Remove the master cylinder.
For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics
