gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Other Service Bulletins for Wiring Harness: > < A/T - Low and Reverse Piston Installation/Removal
Page 1
background image

Band Apply Servo: All Technical Service Bulletins
A/T - No Fourth Gear and/or Burned 2-4 Band Assembly

Number:

83-T-42

Section:

VIIc

Date:

May, 1983

Subject:

NO FOURTH GEAR AND/OR BURNED 2-4 BAND ASSEMBLY THM 700-R4 1982-83 ALL MODELS PASSENGER CAR AND
TRUCK

THM 700-R4 TRANSMISSION

TO:

ALL CHEVROLET DEALERS

If a condition of no fourth gear and/or a burned 2-4 band assembly is encountered on any THM 700-R4 transmission, the cause may be a blocked 2-4
servo exhaust hole. See Figure 1.
The use of RTV silicone sealant and/or some aftermarket oil pan gaskets may block this 2-4 servo exhaust hole causing the above conditions.

When installing the oil pan on any THM 700-R4 transmission, be certain to use original equipment oil pan gaskets so the 2-4 servo exhaust hole is not
blocked. Also, do not use RTV silicone sealant on any THM 700-R4 oil pan.

All Other Service Bulletins for Wiring Harness: > < A/T - Low and Reverse Piston Installation/Removal