S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
Figure 3
To eliminate this condition the entire joint will have to be resealed. This can be done at the same time as procedure 1 (see Figure 3).
1.
Using Bowman Distribution black caulking part number 19023 or equivalent it is possible to seal the area where the dash meets the plenum
assembly through the exposed cowl vent windows located on the plenum assembly.
2.
Remove caulking from package and apply through the exposed cowl vent grille. Firmly push the caulking into the area where the dash and cowl
assembly meet the plenum assembly. To insure proper seai it is necessary to install the caulking the full length of the windshield (3.5 inches trom
the inside of the hood opening)(see Figure 3).
