S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Alignment: Service and Repair
Preliminary Inspection
Perform the following front end inspection before making any adjustments affecting the caster, the camber, and the toe-in:
Important: The vehicle must be on a level surface.
1. Check for the proper inflation pressure of the tires.
2. Inspect for excessive wear on the hub and on the bearing assemblies.
3. Inspect the following components:
^
The ball joints
^
The tie rod ends
^
The idler arm
^
The relay rods
4. Inspect the tires and the wheels for runout.
5. Check the vehicle trim heights. Make any needed corrections to trim height before you adjust the caster, the camber, or the toe-in.
6. Inspect for looseness of the steering gear at the frame.
7. Inspect the shock absorbers for leaks. Check the shock absorbers for noise.
8. Inspect for looseness of the control arms or looseness of the stabilizer shaft attachments.
9. Inspect the alignment equipment. Follow the manufacturers instructions.
