S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
12. Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
-
Tighten the control valve body bolts (in sequence) to 11 Nm (97 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Certain bolts MUST be tightened in a spiral pattern as indicated by the arrows. If these bolts are tightened at random, the valve
bores may become distorted. This will inhibit valve operation.
13. Tighten the TCC solenoid bolts.
-
Tighten TCC solenoid bolts to 11 Nm (97 inch lbs.).
14. Install the transmission oil pan and filter.
15. Lower the vehicle.
