S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Trailer Hitch: Service and Repair
Trailer Hitch Replacement
Removal Procedure
1. Remove the rear bumper impact bar.
2. Remove 4 nuts and 2 stud plate assemblies securing the trailer hitch to each frame rail.
3. Remove the hitch from the frame rails.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the trailer hitch to each frame rail with 4 nuts and 2 stud plate assemblies.
Tighten the trailer hitch nuts to 90 N.m (66 lb ft).
2. Install the rear bumper impact bar.
