S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Exhaust Manifold Gasket: Service and Repair
Exhaust Seal Replacement
Removal Procedure
Caution: Refer to Protective Goggles and Gloves Caution in Service Precautions.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the exhaust manifold pipe to manifold flange bolts.
3. Remove the exhaust manifold pipe from the exhaust manifold
4. Remove and discard the seal.
Installation Procedure
1. Install the exhaust manifold pipe and NEW seal to the exhaust manifold.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust manifold pipe to manifold flange bolts.
^
Tighten the exhaust manifold pipe to manifold flange bolts to 30 Nm (22 ft. lbs.).
3. Lower the vehicle.