S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Air Register: Service and Repair
REMOVAL PROCEDURE
1. Remove the heater/vent module.
2. Remove the floor air outlet screws.
3. Remove the floor air outlet from the heater/vent module.
INSTALLATION PROCEDURE
1. Install the floor air outlet. Ensure that the outlet locks into place.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the floor air outlet screws.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the heater/vent module.
