S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
1. Install the vacuum control assembly to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the vacuum control assembly retaining screws.
Tighten
Tighten the vacuum control assembly retaining screws to 2 N.m (18 lb in).
3. Connect the vacuum harness connector to the vacuum control assembly.
4. Connect the electrical connector (4) to the vacuum control assembly (5).
5. Install the instrument panel carrier.