S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
Important: Remove the nut and the bolt that were used in order to secure the sector gear in position.
2. Install the rivets in order to secure the power window motor to the window regulator.
3. Install the window regulator.
Power Window Switch
Removal Procedure
1. Remove the power window switch from the trim panel by using a flat-bladed tool in order to pry upward on the leading edge.
2. Disconnect the electrical connector from the switch.
Use a small screwdriver in order to press in the retainer springs.
Installation Procedure
1. Connect the electrical connector to the switch.
2. Install the power window switch to the trim panel by pressing down. Ensure that the retainers lock into place.
Water Deflector Replacement - Door
