S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
Blower Motor: Service and Repair
Heating System
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the VCM or PCM.
3. Remove the coolant reservoir.
4. Remove the rear coolant recovery reservoir mounting stud.
5. Disconnect the cooling tube from the blower motor.
6. Disconnect the electrical connector (1).
7. Remove the 5 blower motor and fan assembly mounting bolts (2).
8. Remove the blower motor and fan assembly.
Installation Procedure
1. Install the blower motor and fan assembly.
2. Install the 5 blower motor and fan assembly mounting bolts (2).
Tighten
Tighten the bolts to 4.5 N.m (40 lb in).