S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
Expansion Block/Orifice Tube: Service and Repair
No removal procedure is provided by the manufacturer.
The expansion (orifice) tube is located in the evaporator inlet pipe. For additional information refer to See: Hose/Line HVAC
NOTE:
You may not need to replace the expansion tube when the system diagnostics indicate a restricted expansion tube. Remove the following materials
found on the screen with compressed air:
-
Metal chips
-
Metal flakes
-
Metal slivers
You may reuse the expansion tube under the following conditions:
-
The plastic frame is not broken.
-
The expansion tube is not damaged or plugged.
-
The screen material is not worn.
-
The screen is not plugged with fine gritty material.