S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
Seat Belt Buckle: Service and Repair
Extended Cab
Removal Procedure
1. Remove the bolt that retains the seat belt buckle to the jump seat.
2. Remove the seat belt buckle from the jump seat.
3. Remove the bolt that retains the seat belt and latch to the jump seat.
4. Remove the seat belt and latch from the jump seat.
Installation Procedure
1. Install the seat belt and latch to the jump seat.
2. Install the bolt that retains the seat belt and latch to the jump seat.
Tighten
Tighten the seat belt and latch bolt to 47 N.m (35 lb ft).
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the seat belt buckle to the jump seat.
4. Install the bolt that retains the seat belt buckle to the jump seat.
Tighten
Tighten the seat belt buckle bolt to 47 N.m (35 lb ft).
