S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
IMPORTANT: Insert the notched end of the element into the blade assembly last.
1. Starting at the end of the blade assembly shown, slide the element into the blade assembly's claws. Fully inserting the element forces the plastic
caps oft of the element.
2. Ensure that the blade assembly's claws latch into the notches.
3. Ensure that all other blade assembly claws properly engage the slots on both sides of the element.
4. Insert the pivot of the blade assembly into the wiper arm hook.
5. Pull the assembly upward until the locking tab of the pivot engages the slot in the hook.
6. Carefully lower the wiper arm assembly onto the windshield.