S15/T15 Sonoma P/U 4WD V6-262 4.3L VIN Z TBI (1995)
Note: Insert a drift or large screwdriver through brake caliper into rotor vanes to prevent from turning (fig. 45).
5. Washer (119).
6. Brake Caliper.
Note: Support the caliper with a piece of wire to prevent damage to the brake hose.
7. Rotor.
8. Bolts (116).
9. Hub and bearing assembly (114) from axle joint splined shaft using J 28733-A (fig. 46).
Note: Lay the hub and bearing assembly on the hub bolt (outboard) side. This will prevent damage or contamination of the bearing seal (fig. 47).
10. Splash shield (118).
11. Cotter pin (123).
12. Nut (124).