gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Recall - Ignition Coil Wire Routing|Page 5681 > < Recall - Ignition Coil Wire Routing|Page 5679
Page 6
background image

stalling/no start condition and/or catalytic converter failure.

To correct this condition, dealers are to reposition the coil wire to assure clearance from metal brackets and/or transmission fluid fill tubes.

Vehicles Involved

Involved are certain 1996-98 C/K and M/L model vehicles equipped with 4.3L (L35) engines and built within the VIN breakpoints shown.

Important:

please check DSC Screen 445 or your VIN listing before performing campaign to ensure that the vehicle is affected. Only affected VINs will be paid.

Involved vehicles have been identified by Vehicle Identification Number. Computer listings containing the complete Vehicle Identification Number,
customer name and address data have been prepared, and are being furnished to involved dealers with the campaign bulletin. The customer name and
address data furnished will enable dealers to follow-up with customers involved in this campaign. Any dealer not receiving a computer listing with the
campaign bulletin has no involved vehicles currently assigned.

These dealer listings may contain customer names and addresses obtained from the Inter-Provincial Records. The use of such motor vehicle registration
data for any other purpose is a violation of law in several states. Accordingly, you are urged to limit the use of this listing to the follow-up necessary to
complete this campaign.

Parts Information

The information notice labels (P/N XX005528AA) to be used on the ignition coil wire conduit, required to complete this campaign, will be mailed to
involved dealers, along with this bulletin.

If additional labels are required, they are to be obtained from GM Oshawa by faxing request to 905-644-7687. Be sure to request label, item number

Recall - Ignition Coil Wire Routing|Page 5681 > < Recall - Ignition Coil Wire Routing|Page 5679