Safari Van M V6-262 4.3L VIN Z TBI (1990)
Temperature And Defrost Cables
REMOVE OR DISCONNECT
1. Screws.
2. Control assembly.
^
Pull control assembly out of the instrument panel far enough to reach the control cable assembly ends and the blower switch electrical
connector.
3. Electrical connector(s), as necessary.
4. Control cables.
5. Blower switch, if necessary.
^
Remove the blower switch knob and spring clip, and remove the blower switch.
INSPECT
^
Electrical terminals for corrosion. Remove the corrosion or replace the component as necessary.
^
Temperature and mode levers for freedom of movement. Lubricate, repair, or replace as necessary.
