Savana 1/2 Ton Van V8-5.3L VIN T (2003)
2. Install the WSS mounting bolt.
Tighten the WSS mounting bolt to 18 Nm (13 ft. lbs.).
3. Install the WSS cable mounting clip to the knuckle.
4. Install the WSS cable mounting clip to the upper control arm.
5. Install the WSS cable mounting clip to the frame attachment point.
6. Connect the WSS cable electrical connector.
7. Install the brake rotor (2) shown on the 1500 series.
8. Install the tire and wheel.
9. Perform the Diagnostic System Check - ABS (W/O JL4).
