Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Locate the relationship mark and install the brake drum to the axle.
2. Install the rear brake drum retainers if present.
3. Remove the pin from the park brake lever.
4. Install the tire and the wheel assembly.
5. Adjust the rear brakes.
6. Lower the vehicle.
7. With the engine OFF, gradually apply the brake pedal approximately 2/3 of it's travel distance.
8. Slowly release the brake pedal.
9. Wait 15 seconds, then repeat steps 7-8 until a firm brake pedal is obtained. This will properly seat the wheel cylinders and brake shoes.
