Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Water Pump: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable from the battery terminal.
2. Remove the air cleaner assembly.
3. Drain the engine cooling system.
4. Remove the air intake duct from the throttle body.
5. Remove the coolant recovery reservoir.
6. Remove the upper fan shroud.
7. Remove the fan clutch assembly from the vehicle.
8. Remove the drive belt from the vehicle.
9. Remove the water pump pulley mounting bolts.
10. Remove the water pump pulley from the water pump.
11. Disconnect the radiator outlet hose from the water pump.