Savana 1/2 Ton Van V8-5.7L VIN R (2001)
8. Remove the engine side mount and the shield.
Installation Procedure
1. Install the mount and shield to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the remaining bolts.
-
Tighten the bolts to 54 Nm (40 ft. lbs.).
3. Install the mount to the frame.
4. Install the bolts.
-
Tighten the bolts to 58 Nm (43 ft. lbs.).
5. Lower the engine.
6. Install the through-bolt and nut.
-
Tighten the through-bolt and nut to 95 Nm (70 ft. lbs.).
7. Lower the vehicle. Refer to Vehicle Lifting.