Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Install the heater case (5) to the vehicle.
2. Connect the vacuum lines.
3. Connect the electrical connectors.
4. Roll the instrument panel upward. Refer to IP Carrier Replacement in Instrument Panel, Gages and Console.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the heater case retaining nuts (2) to the engine compartment.
Tighten
Tighten the nuts to 6 N.m (53 lb in).
6. Install the evaporator casing to the vehicle. Refer to Evaporator Core Replacement.
7. Connect the heater hoses from the heater core.
8. Recharge the refrigerant, it equipped with A/C. Refer to Refrigerant Recovery and Recharging.
9. Fill the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID See: Application and
ID/RPO Codes
Heater Case Replacement (C69)
REMOVAL PROCEDURE