Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Lubricate the new injector O-ring seals with clean engine oil.
2. Install the O-rings on the injector assembly (2).
3. Assemble the central sequential multiport fuel injection (SFI) fuel injector assembly into the fuel meter body injector socket.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Assemble the lower hold down plate and nuts (1).
Tighten
Tighten the nuts to 3 N.m (27 lb in).
INSTALLATION PROCEDURE
1. Install the fuel meter body assembly.
2. Install the upper manifold assembly. Refer to Intake Manifold Replacement - Upper or Intake Manifold Replacement - Lower in Engine.
3. Connect the negative battery cable.